Atlantis the Global Leader
- Has developed proprietary water management products and systems since 1986, with
installations in 42 countries worldwide
- Is the leading international provider of sustainable environmental water management
solutions, for collection and purification
- Have offices and partners around the world and a team of experts comprise of environmental
engineers, landscape architects and biologists that work together to pick up where
traditional engineering stops.
Solutions for the environment
Atlantis is a point source infiltration and detention stormwater management system
consisting of 95% void structure products, wrapped in specified geotextile for use
in a wide range of water management applications. Whilst they are light weight and
faster to install than traditional drainage systems, they have been structurally
engineered to be used in heavy-duty applications.
In cooperation with Atlantis (Australia), BMC Gulf now provides you with the Green
City concept enabling reduction in carbon, building cool cities, beautifying the
urban landscape and cleaning, filtering and reusing water through natural infiltration.
 Matrix® Module
The Atlantis® Matrix® module is a lightweight structural underground tank, developed
specifically for subsurface infiltration or retention applications.
|
 Flo-Grid® Porous
Paver
The Flo-Grid® permeable paver revolutionizes the ancient curb & gutter
drainage system. It allows stormwater to infiltrate along the entire length of the
road, into the underlying Matrix® tank
|
 Flo-Cell® 30mm
Drainage Cell
The Atlantis® 30mm drainage cell is a lightweight structural sub-surface
drainage system for applications like; roof gardens, planter boxes, podium landscaping,
vertical wall drainage & sportsfields.
|
 Road-Cell Paver
Road-Cell 52mm reinforcement structure creates a durable hard surface suitable
for heavy duty load traffic areas.
|
 Turf-Cell® Pavers
The Turf Cell® paver is ideal for grass parking bays and low use access
roads. The Turf Cell allows both horizontal and vertical root growth providing ongoing
root protection and grass integrity.
|
 Flo-PipeTM Drainage
Pipe
The Atlantis® Flo-PipeTM delivers superior performance compared to problematic
gravel drains & traditional slotted agricultural pipes. Comes wrapped in geotextile
ready to install.
|
Complete stormwater harvesting solution
In cooperation with Atlantis, BMC Gulf offers a wide range of water management solutions
including: stormwater filtration & purification, water storage and integrated
irrigation systems.
|
Typical Applications
- Infiltration & detention water tanks
- Rainwater harvesting tanks
- Ecological roads, streets
- Highways, channels & swales
- Commercial, domestic
- Developments, leach drains
- Roof gardens & planter box drainage
- Car parks, permeable paving
- Vertical wall drainage
- Sports fields & golf courses
- Civil works, railway tracks
|
Benefits
- Harvest stormwater
- Reduce polluted stormwater runoff
- Protect natural bushland and creeks
- Provide an ecologically sustainable stormwater system
Features
- Tank construction of any volume
- No flushing of tank required
- No gross pollutant trap required
- Long life performance
- Monitor water level
|
|
Geosyn thetic Clay Liners (GCLs) are high performance environmental
liners comprised of geosynthetic carrier components bonded to a layer of low-permeability
sodium bentonite.
CETCO’s GCLs provide better engineered hydraulic performance than
a meter of compacted clay, yet with a total composite thickness of less than 10mm.
CETCO GCLs are manufactured in large rolls that require just a simple overlapped
seam. Easy, cost effective installation make CETCO GCLs a superior choice for a
wide range of environmental applications, such as:
- Landfill liners & caps
- Mining & tailing lagoons
- Canals & irrigation lagoons
- Groundwater protection in road & railway construction
- Artificial lakes, balancing ponds and industrial aeration lagoons
- Secondary containment around fuel storage tanks
CETCO also provides VOLTEX, a highly effective bentonite geotextile
waterproofing system for below-ground vertical and horizontal structural foundation
surfaces. Typical applications for VOLTEX are: foundations, backfilled concrete
walls, earth covered roofs, structural slabs and tunnels.
DÄTWYLER RUBBER stands for high-quality seals and gaskets for longterm
service in tunnels – tunnel segment gaskets and hydrophilic seals. Theses sealing
systems are developed in-house, individually engineered to meet the requirements
of the specific tunnel.
Dätwyler Rubber offers the combination of gasket and hydrophilic
seal as a primary and secondary seal or as a co-extruded solution. For segmental
lined tunnels. Dätwyler develops project specific solutions to suit the geology,
water pressure and design requirements.
Dätwyler’s product range includes Mono-EPDM gaskets, co-extruded
special gaskets CoexSwell and CoexSlide featuring an integral sliding layer to reduce
friction at keystone and counter-keystone.
BMC Gulf provides
you with the right material for the right application! Therefore we carefully
choose our partners, who can supply you with quality products that are
guaranteed to perform.
For over 20 years, Multicoat has maintained its reputation for providing the
highest caliber of products to the construction industry worldwide by adhering
to the strictest specifications.
Multicoat’s waterproofing system is a multi-layer seamless protective coating
which combines an elastomeric waterproofing membrane (Mulasticoat) with a
fiberglass-reinforced, latex-modified cementitious top coating (Krete Kote, Top
Coat or Scratch Kote).
The system is designed to withstand heavy foot and vehicular traffic on
walkways, decks, ramps, parking garages, roofs, etc. and can be applied to
poured in place concrete, tiles, concrete blocks, epoxy, polyfoam sheeting,
stone and most other surfaces or substrates in need of a waterproofing or fire
resistant protective coating
APPLICATION AREAS
• Parking decks • Swimming pools • Water features • Wet areas
The permanently growing traffic volume and load by transport of goods result in
significant requirements of the road network. Especially the heavy-duty traffic
with high axis loads brings a faster wear and tear of the road covering and an abbreviated
usage period with increasing repair work.
BEBIT asphalt reinforcement grids counteract the formation of cracks
in the road covering and offer an economic solution for the traffic way construction.
BEBIT asphalt reinforcement grids are made out of glass fibers
with a melting point of more than 850oC. Due to their specific properties, BEBIT
G and BEBIT G Plus can take high tensile stress and also qualify for their low elongation.